Enjoy Your Off-Road Adventures With An ATV - Featured Article
April 1st, 2008 Subscribe To Our Feed
ATV stands for “all-terrain vehicles”, or basically any kind of open and small, motorized buggies and tricycles that are made generally for off-road riding. And all terrain vehicle is basically designed to have only one operator at any one time. Using and riding an ATV is very similar to an ordinary motorcycle. However, all terrain vehicles have an extra set of wheels that give more stability at slower speeds or when stopped.
The first ever ATV, which were designed with six wheels, was introduced to the public around 1950s. However, Honda improved the early models by producing the first three-wheel all-terrain vehicle. It instantly became famous when it was publicly displayed in the 1971 James Bond Movie - Diamond’s are forever.
The History Of ATVs
After the release of the three-wheel ATVs, various models were produced for recreational use. These improved models offered big balloon tires without mechanical suspension. It was only in the early 1980s that lower tires with suspension were introduced.
The popularity of ATV was due to its ability to pass anywhere on terrain, which other kinds of vehicles cannot cross. These all-terrain vehicles instantly became a hit with Canadian and US hunters.
Aside from recreational use, sport models of ATV became popular when Honda released the 1981 Honda ATC250R with an impressive engine placement, full suspension, 5-speed transmission and stunning design.
When it comes to four-wheel models, Suzuki develops high-performance all-terrain vehicles. Since the company introduced the very first ATV for beginners in 1983, it continuously produced a variety of 4-wheel ATVs for both beginners and professional riders. Other leaders in ATV production include Yamaha and Kawasaki.
In the 1980s, a variety of safety issues was raised regarding the three-wheel all-terrain vehicles. Because of this, all manufacturers of ATV ended the production of 3-wheel and switched to 4-wheel models. Six-wheel models are also available. However, these all-terrain vehicles contain a small, dump bed and additional set of wheels that increases load capacity.
Today, you can find all-terrain vehicle models for both utility and sport markets. Utility ATV models are bigger, 4-wheeled vehicles with speeds of up to 65 miles per hour and have the capability of towing small trailers or dragging small loads on racks or dump beds. However, sport all-terrain vehicles are designed with a manual transmission that has a 2 Wheel Drive and a smaller, lighter design that can go at speeds up to 90 mph.
It’s no wonder that so many different people are now participating in ATV riding not just in the United States but all over the world. It gives adults the ability to ride and enjoy the race with an outstanding vehicle performance in a specific unique design for a racing model in the off-road world.
Technorati Tags: 5 speed transmission, all terrain vehicles, atv, Honda ATC250R, James Bond
Related Tags: atv, atv accessories, Polaris ATV, 5 speed transmission, 500cc motor, air leaks, ATV Instruction, ATV rider, ATV teaching, atv tires, ATV Tracks, childrens atv, honda, Honda ATC250R, James Bond, kazuma, Learning ATV Riding, Polaris ATV Outlaw, Polaris ATV Parts, Rocky Mountain ATV, suzuki, used ATV, Yamaha ATV Parts, Youth ATV
ATV Tracks - Increasing Your All-terrain Vehicles Capability
November 30th, 2007 Subscribe To Our Feed
All-terrain vehicles, or better known as ATVs for short, can be a very entertaining sport as well as work tool, with both utility as well as versatility in mind in terms of design. All-terrain vehicles can be utilized for having a good time while camping or just riding around in a leisurely way, or in more serious jobs such as hauling small trailers or plowing snow, and are perfectly at home regardless of whether you’re on grassy terrain or just riding around on flat ATV racing tracks.
This doesn’t necessarily imply that ATVs are completely perfect, as there is still some chance of the possibility of them flipping over if they are driven in an improper manner or possibly over unstable ground. Also they possibly can be mired in snow or mud. Obviously, there are methods around this, and one excellent solution or modification to these types of vehicles is a set of rubber ATV tracks to increase stability as well as traction on the various kinds of ground.
New Treads
An ATV fitted with tracks looks like it’s got something close to tank treads attached, and they work on the same principle, by keeping more of the vehicle’s mode of locomotion in contact with the ground. It also has a tendency to widen the footprint, or the amount of ground area the ATV takes up, which also increases stability; think about how much easier it is to tip over a tall, narrow table than a wide one that’s close to the ground.
The suspension system of the ATV tracks as well as the rubber material ensures that it can run over plenty of irregular ground, making an ATV into an even more appropriate vehicle for all terrains, and ATV track systems tend to raise the ATV a few more inches off the ground, giving it further clearance underneath.
Light Weight
The other advantage to the increased footprint is that because the tracks have more contact with the ground than tires, which have contact with the ground only at four points, the ATV is putting less pressure on any one given spot on the ground than with tires, the same principle that’s behind the way snowshoes work. Between this and the design of the ATV track’s treads, this makes an ATV fitted with tracks ideal for snow and mud, where ordinary tires might simply sink in.
The additional benefit to this is that ATV tracks are more friendly to the environment, due to the fact that administering less pressure on the ground, an ATV that is using rubber tracks has less of a chance to leave deeper tracks as well as tearing up the ground in general, which is one of the more common complaints when it comes to ATVs in general.
But the added attraction on various types of trains and the lessened pressure that is administered to the ground, an ATV track system is the exact type of thing for someone who owns an all-terrain vehicle that is searching for improvements to their current machine.
Technorati Tags: all terrain vehicles, atv accessories, ATV Tracks
Related Tags: atv, atv accessories, Polaris ATV, 5 speed transmission, 500cc motor, air leaks, ATV Instruction, ATV rider, ATV teaching, atv tires, ATV Tracks, childrens atv, honda, Honda ATC250R, James Bond, kazuma, Learning ATV Riding, Polaris ATV Outlaw, Polaris ATV Parts, Rocky Mountain ATV, suzuki, used ATV, Yamaha ATV Parts, Youth ATV
Think About The Yamaha ATV Parts
November 9th, 2007 Subscribe To Our Feed
You will find numerous ATVs on the open market nowadays. For the people who are just beginning this high paced sport, the expenses of a brand new ATV might seem a bit steep. Some people may be of the opinion that a less costly machine available from a new, small manufacturer might be appealing. However, you will learn that there are numerous possible challenges with such a purchase. A term has been coined for such challenges which is called the Yamaha ATV parts problem.
Replace, Repair, Upgrade
To a potential new ‘ATVer’, there is nothing more lovely than a brand new ATV made for the kind of riding that is planned. Most riders find, after a while, that there is nothing more pleasant than changing that piece of perfection to upgrade the performance, to make it more appropriate for a different type of riding or to repair a part broken during the educational period of riding. That’s when having a mainstream ATV is so convenient.
An ATV made in limited numbers by a small company is only a good buy until replacement parts are needed. That’s the Yamaha ATV parts problem. A company like Yamaha makes and sells so many ATVs that Yamaha ATV parts are readily available from Yamaha itself and compatible parts are made by other companies. The same quality can be maintained in repairs and replacements by purchasing Yamaha ATV parts made by the same high quality company that made the ATV.
For upgrades or to increase the cool factor, specialty parts made by specialty companies can be found that are compatible with an ATV made by a large, established company like Yamaha or Honda or Arctic Cat.
But what about the cost? A brand new, top-of-the-line ATV
from a large company may be expensive compared to the machine from a new company. But a used ATV may be very affordable. In the old days, buying a used machine was limited to what could be found in the area.
Nowadays, ATVs that are used can be bought on the internet through a dealer from an online web store or auction listing. You sometimes will find that the used ATV might be as shiny as a newer one but it may be also less costly and better for you in that regard.
Needless to say, any type of used vehicle should be checked out by a mechanic that you have faith in first. Also take into consideration how those dependable Yamaha ATV Parts can assist in making that ATV just a little more shinier, as well as cooler and more fuel efficient. It may not be in the character of an ATV owner, however it is a wise idea to cultivate the habit of peering down the road a bit and preparing for contingencies
Technorati Tags: all terrain vehicles, atv accessories, used ATV, Yamaha ATV Parts
Related Tags: atv, atv accessories, Polaris ATV, 5 speed transmission, 500cc motor, air leaks, ATV Instruction, ATV rider, ATV teaching, atv tires, ATV Tracks, childrens atv, honda, Honda ATC250R, James Bond, kazuma, Learning ATV Riding, Polaris ATV Outlaw, Polaris ATV Parts, Rocky Mountain ATV, suzuki, used ATV, Yamaha ATV Parts, Youth ATV
